Change the WAN Connection Type to Dynamic IP for TP-link router

Change the WAN Connection Type to Dynamic IP.

Before you install the TP-Link Router, if your computer (directly connected to your ADSL\Cable modem) is able to access the Internet automatically without running any additional program, please use Dynamic IP as the WAN connection type. TP-LINK Router use Dynamic IP mode by default

Step1   Open the web browser and type the LAN IP address of the router in the address bar, the default IP address of TP-LINK router is 192.168.1.1 or 192.168.0.1, and then press Enter.

Note: if you can not access the web page, please check the IP address of your computer or reconfigure the IP address of your computer.

 

Step2    Type the username and password in the login page, the default username and password  are both admin.

Note:

1. If you got a server error -401, it means you entered a wrong username or password.

    If you forget the user name or password that you set, you need to reset the router to factory default settings.

 

2.  If the login page can not display, please call us at 1888 479 2017 to check the problem.

 

Step 3  Click Network->WAN in the left menu , and change the WAN Connection Type to Dynamic IP Address then click the Savebutton.

 

Step 4    Wait for a few minutes and check the WAN part on the Status page,  if it shows any IP address (similar as below), that means the connection between the Router and the Modem is established.

 

 

Step 5  IF still there are errors than easily you can fix it by taking help of experts for that you just have to call our Microsoft certificated technicians. Our certified experts aims at delivery quality and instant support assistance for TP-link. The professionals won’t leave your issue in the middle; they are committed for delivering reliable solution to every technical problems a user comes across. 

or log on to our website: 

 https://www.icognix.net/technical-support-for-tp-link/