Install TP LINK Adapters on Windows 7

Before the installation, please download the latest driver from TP-Link official website

Then pl

Insert the adapter onto your computer.

 ease follow the steps below:

Step 1

Step 2

Right click Computer, and then click Manage.

Step 3

Open Device Manager. Right click the adapter and then click Update Driver Software....

Step 4

Click Browse my computer for driver software.

Step 5

Click Let me pick from a list of device drivers on my computer.

Step 6

Highlight Show All Devices and click Next.

Step 7

Click Have Disk.

Step 8

Click Browse.

Step 9

Point to the inf file in the driver folder, and then click Open.

Note: Please click start button, right click Computer and go to properties to confirm operating system and system type of your computer.

Step 10

Click Next.

Step 11

Click Install this driver software anyway.

Step 12

Click Close.

You can call TP  link tech support for more information.

Toll free numbers:

USA : 1888 479 2017

UK ;   0800 820 3300

Aus:  1800 987 893

website:  https://www.icognix.net/support-for-tp-link-routers/

change the DNS settings on a TP-Link AC1750 router

Login To The TP-Link AC1750

To get started configuring the TP-Link AC1750 DNS page you need to login to your router. If you are already logged in you can skip this step.

To login to the TP-Link AC1750, follow our TP-Link AC1750 Login Guide.

Change the DNS settings on a TP-Link AC1750

If you followed our login guide above then you should see this screen.

This guide begins on the Status page of the TP-Link AC1750 router. When you want to change your Domain Name System settings, or the DNS settings, click the file one left hand side of the page labeled DHCP, then DHCP Settings.

Configure the DNS section of your TP-Link AC1750

This particular page deals with the DNS server your computer uses on a regular basis. Find the Primary DNS box and enter the main address of the DNS server you have decided to use. This address is the one that is always used first. Enter the secondary address in the box below that labeled Secondary DNS. This one will only be used if the first can't be located. Finally, tick the Save button.

There is another DNS server you can change, this one usually only deals with updates, but we recommend setting both to be sure your ISP doesn't have control of your DNS servers. Click the Network button on the left side of the page. Then under that, WAN.

You are directed to a page like the one you see above.

First, tick the box that reads Use These DNS Servers. Then, enter the same primary address you entered on the previous page in the box labeled Primary DNS. Below that is the Secondary DNS. Type in the same secondary DNS server address you entered on the last page. Finish by clicking Save.

 you're done!

you might stuck somewhere with the steps or with some router issue but you not have to worry for that cause we also have better solutions for that. we as Tp link tech support team has professional and Microsoft certificated technicians who can resolve your issues . For that you just need to call our technical support team at our toll free numbers, or you can even visit our website for more informations.

Our toll free numbers are;

USA : 1888 479 2017

Australia: 1800 987 893 

web address:

https://www.icognix.net/technical-support-for-tp-link/

Change the WAN Connection Type to Dynamic IP for TP-link router

Change the WAN Connection Type to Dynamic IP.

Before you install the TP-Link Router, if your computer (directly connected to your ADSL\Cable modem) is able to access the Internet automatically without running any additional program, please use Dynamic IP as the WAN connection type. TP-LINK Router use Dynamic IP mode by default

Step1   Open the web browser and type the LAN IP address of the router in the address bar, the default IP address of TP-LINK router is 192.168.1.1 or 192.168.0.1, and then press Enter.

Note: if you can not access the web page, please check the IP address of your computer or reconfigure the IP address of your computer.

 

Step2    Type the username and password in the login page, the default username and password  are both admin.

Note:

1. If you got a server error -401, it means you entered a wrong username or password.

    If you forget the user name or password that you set, you need to reset the router to factory default settings.

 

2.  If the login page can not display, please call us at 1888 479 2017 to check the problem.

 

Step 3  Click Network->WAN in the left menu , and change the WAN Connection Type to Dynamic IP Address then click the Savebutton.

 

Step 4    Wait for a few minutes and check the WAN part on the Status page,  if it shows any IP address (similar as below), that means the connection between the Router and the Modem is established.

 

 

Step 5  IF still there are errors than easily you can fix it by taking help of experts for that you just have to call our Microsoft certificated technicians. Our certified experts aims at delivery quality and instant support assistance for TP-link. The professionals won’t leave your issue in the middle; they are committed for delivering reliable solution to every technical problems a user comes across. 

or log on to our website: 

 https://www.icognix.net/technical-support-for-tp-link/

How to use two wireless routers to extend range of Tp-link router

Two routers is often the best solution to poor wireless ROUTERS, giving you a seamless and quick way to extend Wi-Fi range. If you've gone down the HomePlug wireless access point route, the instructions here are similar, but check your product's manual for full instructions and how to configure it.

STEP 1 - Connect to your Tp-link router

 First Connect to your primary router's (the one connected to broadband) web-based management page and navigate to the DHCP settings, which are most likely under the LAN settings. DHCP is the protocol that deals with network addresses for connecting devices, as each one must have its own unique IP address. An IP address is made up of four numbers separated by full stops, such as 192.168.0.2.

The DHCP server information will tell you the first address that is handed out, such as 192.168.0.2. It will then either tell you the last address, such as 192.168.0.100, or the number of addresses it hands out. NOW, you add the number of addresses to the last number of the starting address to get the end address. If the number of addresses was 100 and the starting address was 192.168.0.2 the last address would be 192.168.0.102.

You need to note down an IP address that falls outside of this range and is not the same as your router's IP address. This means keeping the first three numbers the same, such as 192.168.0, and picking the final number, which can be between 1 and 254. In both of our examples above, 192.168.0.200 would work.

Step 2 - Configure the new Tp-link router

Next turn on your new router, but don't connect it in any way to your existing router. Instead, plug a computer into the new router via Ethernet and visit its web management page.

Look out for the router's IP address setting. This must be for the LAN interface, not the WAN interface, which is for the internet: the two addresses are separate and not related. Change the router's IP address to the one that you found was safe in Step 1 of this guide (192.168.0.200 in our example). Your router may restart. If it does, you'll need to connect to its web-based management page again, this time typing the router's new IP address into your browser.

If your computer won't connect, it's possible that it's still holding on to an old IP address, so you'll need to make it refresh its settings. The easiest way to do that is to unplug the Ethernet cable from your computer and plug-it in again. Once you're connected to your router again, find the DHCP page and select Disable. Click Save to apply the changes. You'll most likely be disconnected from the router, but that's fine for now.

STEP 3 - Connect the two routers together

Disconnect your computer from your new router, as it's time to connect it to your broadband router. You can either do this step using an Ethernet cable, or you can use HomePlug between them: both do the same job. Plug one end of an Ethernet cable into a spare Ethernet port on your broadband-connected router. Plug the other end into a spare Ethernet port on your new router: not the WAN port, as this will not work.

If you're using HomePlug, you'll need two Ethernet cables: one from the new router to a HomePlug adaptor, and one from a HomePlug Adaptor to the old internet-connected router.

STEP 4 - Configure both routers to use the same Wi-Fi network

Connect wireless to your home network, as you would normally. Get up a browser and type in your new router's IP address to access its web-based management. Go to the wireless settings and input the same network name and security settings as for your existing wireless network. Make sure you pick a new channel that doesn't overlap with the existing network's channel (this is for both 2.4GHz and 5GHz networks) and that you've configured both routers to use optimal settings, as per our 2.4GHz and 5GHz guides. Save the settings. You've now got one big wireless network, with excellent range and throughputs.

For more technical help you  can call our tech support team for that at 1888 479 2017.we aim to provide you the instant technical support for TP-Link and we’re committed to deliver the best technical support. Our Microsoft certified experts can resolve any type of TP-Link Router related issues. We are never contented with our efforts until you get all your issues resolved.

or log on to 

https://www.icognix.net/technical-support-for-tp-link/