Showing posts with label Tp-link router customer care number. Show all posts

Wednesday, 29 March 2017

Steps to Configure VPN on TP-Link Router Manually

TP LINK TECH SUPPORT AUSTRALIA :

To configure Ivacy please follow the given instructions:

Access your router control panel and click on ‘Network’ from the left panel and then click ‘WAN’.

In ‘WAN Connection Type’ select ‘PPTP/Russia PPTP’ from drop down menu.

Type in your Ivacy ‘Email’ and ‘Password’ in respective fields as registered with Ivacy.

Select ‘Dynamic IP’.

In ‘Service IP Address’ field Insert your desired server address in ‘VPN Server’.

Choose whether you would like to be reconnected manually, on demand or always.

When you have done the above, click on “Save”. You Are Done!
VPN connection will establish in few seconds.

If you face any issue in Ivacy VPN connection setup, then please feel free to contact our Customer Support Team at our toll free numbers:

Toll free numbers :

Australia

1800987893

USA:

1888 479 2017

Wednesday, 1 March 2017

HOW TO SETUP TP-LINK TD-W8968 ROUTER STEP BY STEP

TP-Link TD-W8968 Router

TP-LINK’s TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router is an incredibly robust all-in-one device allowing users to access high-speed internet connection via ADSL or Ethernet WAN (EWAN) using its interchangeable LAN/WAN port and share it wirelessly at 300Mbps wireless 802.11n speeds.
The TD-W8968 supports ADSL or Ethernet WAN connections (EWAN) that allow users to have the flexibility of different Internet connections among ADSL, cable or fiber modem using its interchangeable LAN/WAN port.

Follow the steps to setup TD-W8968 by Tp link tech support.

Step 1:

Obtain your Default Gateway

Step 2:

Open your Internet Browser, such as Internet Explorer, Google Chrome, etc...

Step 3:

Enter your Default Gateway in the address bar of your Internet Browser and press Enter.

Step 4:

This will display a Pop-Up Window to enter your Router Username and Password (see below image). The default factory settings for the username and password should both be “Admin”.

Step 5:

When you get to this page select Interface Setup:

Step 6:

Change the encapsulation mode to PPPoA/PPPoE:

Step 7:

In the Username and Password field, input the Connection Username and Password that was provided by your ISP.

Step 8:

Select Save

Step 9:

The next step is configuring your Wi-Fi settings (wireless) as seen in image below.

If you do not want to use the wireless feature on your Router, click on deactivate checkbox.
If you do want to use the wireless feature, ensure that the activated checkbox is checked.

Step 10:

Enter your SSID. The SSID is the name that you want your wireless network to be called.

Step 11:

The following step is for your Wireless Security setting. It is advisable to have a password on your wireless feature.

Step 12

Select WPA/WPA2 if you want your wireless network password protected. Enter the Password you want in the space provided next to Pre-Shared Key:

Step 13:

Once you are sure that all settings are correct, click Save

Your router might restart after it has saved the configuration.

You might need technical support if you get stuck with any issues while setting up, We suggest you to call our TP link tech support technicians to fix it, Get world class solutions at TP link tech support.

Toll free numbers:

USA : 1888 479 2017

Aus: 1800 987 893

UK : 0800 830 3300

You can visit us at our website for more info:

https://www.icognix.net/support-for-tp-link-routers/

Wednesday, 22 February 2017

Steps to Configure VPN on TP-Link Router Manually

Tp link tech support

Before you start, please make sure that:

You have a working internet connection
A Premium Ivacy VPN account. If you haven’t subscribed yet, please contact technical support for details ( 1888 479 2017)

To configure Ivacy please follow the given instructions:

Access your router control panel and click on ‘Network’ from the left panel and then click ‘WAN’.

In ‘WAN Connection Type’ select ‘PPTP/Russia PPTP’ from drop down menu.

Type in your Ivacy ‘Email’ and ‘Password’ in respective fields as registered with Ivacy.

Select ‘Dynamic IP’.

In ‘Service IP Address’ field Insert your desired server address in ‘VPN Server’. Click here to get the complete server list.

Choose whether you would like to be reconnected manually, on demand or always.

When you have done the above, click on “Save”. You Are Done!
VPN connection will establish in few seconds.

If you face any issue in Ivacy VPN connection setup, then please feel free to contact our Customer Support Team or email us

Toll free numbers:

USA : ( 1888 479 2017)

AUSTRALIA : (1800 987 893)

UK : ( 0800 820 3300)

website: https://www.icognix.net/support-for-tp-link-routers/

Sunday, 29 January 2017

Install TP LINK Adapters on Windows 7

Before the installation, please download the latest driver from TP-Link official website

Then pl

Insert the adapter onto your computer.

ease follow the steps below:

Step 1

Step 2

Right click Computer, and then click Manage.

Step 3

Open Device Manager. Right click the adapter and then click Update Driver Software....

Step 4

Click Browse my computer for driver software.

Step 5

Click Let me pick from a list of device drivers on my computer.

Step 6

Highlight Show All Devices and click Next.

Step 7

Click Have Disk.

Step 8

Click Browse.

Step 9

Point to the inf file in the driver folder, and then click Open.

Note: Please click start button, right click Computer and go to properties to confirm operating system and system type of your computer.

Step 10

Click Next.

Step 11

Click Install this driver software anyway.

Step 12

Click Close.

You can call TP link tech support for more information.

Toll free numbers:

USA : 1888 479 2017

UK ; 0800 820 3300

Aus: 1800 987 893

website: https://www.icognix.net/support-for-tp-link-routers/

Sunday, 1 January 2017

HOW DOES THE WIRELESS SIGNAL EXTENDER WORK? / INSTALLING WIRELESS EXENDER

HOW DOES THE WIRELESS SIGNAL EXTENDER WORK?

You could have your router downstairs beaming a very strong wireless signal downstairs, but when you go upstairs that very strong wireless signal becomes very weak. In this scenario a booster would help. It would be in the weak signal upstairs room boosting that weak/poor signal.A wireless signal extender (booster) acts in a completely different way to an access point. Its only job is to wirelessly connect to your router's very strong wireless signal and boost it inside another room that is known to receive a poor/weak wireless signal. So to clarify.

INSTALLING THE WIRELESS SIGNAL EXTENDER

Here are the first steps to take before running the Installation CD:

Make sure your router, computer and extender are all switched OFF and all next to each other
Plug the extender's power supply unit (psu) into an electric socket with its other end going into the back of the extender
Plug one end of the supplied ethernet cable into the extender and the other end into your computer
Screw the two antennas on the extender and point the antennas towards the sky
Switch your router on and wait until all of its lights are on
Switch your computer on and wait two minutes after its desktop appears
Switch the extender on and give it a couple of minutes to settle down
Insert the extender's installation cd

When you have carried out the above steps and inserted the Installation CD you should then see the following autoplay message requester appear. If it doesn't appear you will need to explore the installation cd for the autorun setup file (not exampled here). In this example simply click on the RUN AUTORUN.EXE link to launch (run) the Installation Wizard.

Fig 1.0 - Click on the RUN AUTORUN.EXE link to continue

The first step of the Installation Wizard asks you to identify your particular model of the extender, so that it knows what Easy Setup Assistant to launch (Fig 1.2). Once you have identified your extender model hover the mouse pointer over its image, to bring up its menu-items, and then click on the EASY SETUP ASSISTANT menu-item to continue. In this example I am using the TL-WA830RE model.

Fig 1.1 - Click on the EASY SETUP ASSISTANT menu-item associated with your particular extender model

Clicking on the EASY SETUP ASSISTANT menu-item displays the first step (Welcome message) of the Easy Setup Assistant, launched by the Installation Wizard. At this point it is the Easy Setup Assistant that will guide you through the installation process. Just click on its STARTS button to continue.

Fig 1.2 - Click on the START button to continue

With the four next steps of the Easy Setup Assistant you can simply click on their NEXT buttons because they are only telling you how to plug in the cables and so on, just like I have mentioned above in my 8 pre-installation steps.

Fig 1.3 - Read the diagram, if need be, and then click on the NEXT button to continue.

Fig 1.4 - Read the diagram, if need be, and then click on the NEXT button to continue.

Fig 1.5 click on the NEXT button to continue.

Fig 1.6 click on the NEXT button to continue.

In Fig 1.5 above it is very important you double check that the lights on your extender are either flashing or steady as described in that diagram before you click on the NEXT button. Assuming they are, the next step (Fig 1.6 above) asks you to insert your extender's Default IP Address; which should be 192.168.0.254 - Check the label underneath, or on the side of, the extender for these details. In my case the Default IP Address was already inserted into the above window for me by the easy setup assistant; so I only needed to click on the NEXT button to continue.

Step 7 of the easy setup assistant (below) does a check-up of your network configuration with regards to installing/configuring the extender, to make sure everything is okay. In this example the Windows 7 firewall was blocking it from doing certain network/installation activities; hence why I had to click on the ALLOW ACCESS button of the Windows 7 security alert (firewall message requester) to continue.(ticked) the option called PRIVATE NETWORKS, SUCH AS MY HOME OR WORK NETWORK to make sure the extender would work with my home network.

Fig 1.7 The easy setup assistant is checking that all is well with your network setup

Fig 1.8 Allow easy setup assistant access to your network so it can install the extender properly

Fig 1.9 Network checks successful - Click on the NEXT button to continue

With the network checks successful (above) and the extender installed, but not fully configured yet, you will be presented with your router's wireless network name and settings; which in my case are from my Yoingco wireless network. Verify that these details are correct before clicking on the NEXT button. These router wireless network settings will be used to configure the extender's network settings.

Fig 1.10 Make sure these router wireless network settings are correct before clicking on the NEXT button

After a little more configuring the easy setup assistant will ask you to enter the router's wireless network password (below). Simply enter it and click on the NEXT button to continue. If you make a mistake (i.e. realise you have the wrong wireless network) you can click on the BACK button. In this example all was fine (Fig 1.12 below).

Fig 1.11 Enter the password of your router's wireless network before clicking on the NEXT button

Fig 1.12 Click on the NEXT button to submit these wireless network settings to the extender

At this point (Fig 1.12 above) you really need to make sure the wireless network settings you have entered above are for the wireless network you want the extender to use and connect to. If they are not, click on the BACK button to start over. Otherwise click on the NEXT button to complete the final stages of installation.